Maintenance must know the top watch Cheats
Life of the watch and the wearer is related to the proper use and maintenance of watches, watches look dirty, strap length discomfort, harsh environments, etc., are likely to cause damage to the watch and shorten life. In high-end watches every two to three years should do the appropriate maintenance, performance and movement detection of walking power consumption, regular servicing will effectively extend your use of the watch time.
Water table depend table mirror, rear cover, head, etc. waterproof apron to achieve the appropriate standard. All the water table in the bottom cover are playing there "WATER RESISTANT" English words or "WATER PROOF" of. No water mark can only watch the dust should be avoided wet. 30 meters (3ATM, ie 3 atm) water table, Wash hands or use the rain that just splashing water droplets on the surface and did not have any water pressure is applied to the table. 50 m water table suitable for swimming and general housework, 100 meters waterproof watch can be used for swimming and diving and other underwater work.
Aging waterproof apron can affect the water resistance of the watch, so watch waterproof apron and head (containing water laps) should be changed regularly based on usage. Quartz watch every time replace the battery must also replace the water element to ensure good water resistance.
Any waterproof watches are not suitable for wearing to wash hot water bath, sauna or large temperature changes in the environment. Because waterproof apron will be affected by temperature, thermal expansion and contraction voids and accelerated aging causing water condensate, serious mechanical damage will occur within the water and tables.
In the national standard, magnetic and shock resistance standards is the "residual effects" to represent the residual effect refers to the difference between the instantaneous difference between the pre-test watches watches difference between the instantaneous detection and after.
Shock: When the watch accidentally dropped from one meter height level hardwood surface, quartz watch no more than two seconds remaining effects, residual effect of mechanical watches no more than 60 seconds.
Magnetically shielded: When the watch occasionally in intensity 4800A / m magnetic field, quartz watch residual effect no more than 1.5 seconds, mechanical male table (movement area of more than 314 mm2) residual effect no more than 30 seconds, no residual effect of mechanical female form more than 45 seconds.
Any waterproof watches are not suitable for wearing to wash hot water bath, sauna or large temperature changes in the environment
In addition Shuimi by: accidentally inside the case without water, and can be used silica particulate matter called hydrocephalus watch already put together a sealed container, a few hours later, remove the watch, the water is all gone ʱ?? This method is simple and economical, precision and life on the table were not any damage. Has repeatedly silica gel after absorbing water, can be dried for several hours, water absorption capacity can be regenerated at 120 ℃, it can be used repeatedly.
Refurbished secret by: Watch Mongolian land is set aside a lot of track later, you can cast the first drops 12 drops of water on the table, and then squeeze a little toothpaste obliterated, you can remove the designated pattern leaving the windshield as new.
Maintenance secret by: wear watches, the hands sweat on the case is corrosive steel case because it is nickel-chromium alloy, corrosion resistance can be better, semi-steel case is copper, long-term contact with sweat, easy corrosion, You should always wipe the sweat with a soft cloth or plastic table mat care to prevent erosion of sweat.
Do not open the back cover, so as not to affect the movement of dust into the normal operation of the watch.
Do not watch on there are mothballs wardrobe, table oil to prevent deterioration.
Do not watch on the radio, television, in order to avoid magnetization.
Long-term storage does not wear a watch, should be winding once a month on a regular basis, so that part will not be long at rest, in order to ensure the operation of the performance table machine.